Lathes : Manual - KBC Machinery

KBC 7x12 Variable Speed Mini Lathe 115V 1PH
[6-275-001]

Variable electric spindle speeds from 0~2500rpm.	Inch metric graduations on dials.	Includes 3 jaw chuck, toolpost, chip tray and splash guard.	3" three-jaw chuck.	MT #2 dead center.
$599.00

KBC 9x18 Belt Drive Bench Lathe with Stand 3/4HP Motor 1PH
[6-335-000]

Complete with threading gearbox.	Belt drive for smooth, quiet operation.	Tray-top cabinet floor stand included!	4" 3 Jaw Chuck.	7" 4 Jaw Chuck.
$1,295.00

JET 9x20 Belt Drive Bench Lathe 3/4HP 1PH
[6-200-020]

Power feed of apron in the direction of the chuck for smooth turning.	Threading gearbox & thread dial for threading.	4" 3 jaw chuck & 7" 4 jaw chuck with threaded back plate.	Face plate.	4-way tool post.
$1,949.00

KBC 12x36 Precision Toolroom Lathe with Stand 2HP Motor 1PH
[6-660-010]

Floor model complete with cabinet floor stand and rear splash guard.	All gear head, hardened and ground ways.	9 spindle speeds, 70-1400 RPM.	12" swing x 36" between centers.	D1-4 spindle mount, 1-1/2" bore.
$3,495.00

KBC 13x40 Precision Toolroom Lathe 2HP Spindle Motor 1PH
[6-269-008]

13" swing x 40" between centers.	Floor model with full-length rear guard.	All gear head, hardened and ground ways.	8 spindle speeds, 70-2000 RPM.	D1-4 spindle mount, 1-1/2" bore.
$4,395.00

KBC 5C Collet Turret Lathe with Bar Feed 2HP Motor 3PH
[6-525-005]

Uses standard 5C collets with a fast lever lock/release system.	4-speed synchronized gearbox for fast speed changes.	Coolant System.	Bar Feed System.	Complete with Knee Tools, Drill Chucks, Round Die Holder and Bar Stop.
$4,795.00

JET 13x40 Belt Drive Bench Lathe 2HP 1PH
[6-200-021]

Enclosed gearbox design provides smooth, quiet operation.	Helical cut headstock gears reduce noise.	Spindle is supported by precision tapered roller bearings.	V-way bed is induction hardened and ground.	T-slotted compound slide with four-way tool post.
$4,899.00

KBC 14x40 Precision Toolroom Lathe 3HP Spindle Motor 3PH
[6-269-006]

14" swing x 40" between centers.	Floor model with built-in coolant system and rear splash guard.	Hardened and ground gears in headstock, hardened and ground bed ways.	16 spindle speeds, 45-1800 RPM.	D1-4 spindle mount, 1-1/2" bore.
$5,695.00

JET 13x40 Geared Head Bench Lathe with Stand 2HP 1PH
[6-200-022]

Enclosed gearbox design provides smooth, quiet operation.	Hardened and ground gears are featured in the headstock and gearbox.	D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings.	V-way bed is induction hardened and ground.	T-slotted compound slide with four-way tool post.
$5,799.00

KBC 14x40 Precision Toolroom Lathe 3HP Spindle Motor 230V 1PH
[6-269-007]

14" x 40" capacity.	Heavy-duty 1pc cast iron base.	Runs on 230V single-phase power (no phase converter required).	Satin-chrome dials graduated in inch and metric.	All gear head, hardened & ground ways.
$6,495.00

KBC 16x40 Precision Toolroom Lathe 6HP Spindle Motor 3PH
[6-269-009]

16" swing x 40" between centers.	D1-6 camlock spindle with 3-point bearing support.	Large 2" spindle bore.	16 spindle speed, 45-1800 RPM.	3/6 HP 2-speed motor wired 230V, 3-Phase.
$7,995.00

Model GH-1340W-1 JET 13x40 Geared Head Engine Lathe 3HP Spindle Motor 1PH
[6-200-040]

13" x 40" capacity (19" in gap).	Built-in coolant system with full-length rear splash guard.	All gear head, hardened & ground ways.	12 spindle speeds, 40-1800 RPM.	D1-4 spindle mount, 1-1/2" bore.
$9,999.00

Model GH-1340W-3 JET 13x40 Geared Head Engine Lathe 3HP Spindle Motor 3PH
[6-200-041]

13" x 40" capacity (19" in gap).	Built-in coolanty system with full-length rear splash guard.	All gear head, hardened & ground ways.	12 spindle speeds, 40-1800 RPM.	D1-4 spindle mount, 1-1/2" bore.
$9,999.00

Model GH-1440W-1 JET 14x40 Geared Head Engine Lathe 3HP Spindle Motor 1PH
[6-200-042]

14" x 40" capacity.	All gear head, hardened & ground ways.	12 spindle speeds, 40-1800 RPM.	D1-4 spindle mount, 1-1/2" bore.	3 HP, 1 phase.
$10,599.00

Model GH-1440W-3 JET 14x40 Geared Head Engine Lathe 3HP Spindle Motor 3PH
[6-200-043]

14" x 40" capacity.	All gear head, hardened & ground ways.	12 spindle speeds, 40-1800 RPM.	D1-4 spindle mount, 1-1/2" bore.	3 HP, 3 phase.
$10,599.00

KENT 20x40 lathe 3" Spindle Bore 7.3HP Motor 230V 3 Phase
[6-273-065]

7.3 HP main spindle motor, 12 speeds.	D1-8 camlock, 3.2" spindle bore.	Hardened and ground gears and bedways.	Inch dials and leadscrews.	Safety foot brake.
$12,595.00

Kent 20x60 lathe 3" Spindle Bore 7.3HP 3PHase
[6-273-066]

7.3 HP main spindle motor, 12 speeds.	D1-8 camlock, 3.2" spindle bore.	Hardened and ground gears and bedways.	Inch dials and leadscrews.	Safety foot brake.
$13,295.00

Kent 14x40 Variable Speed Toolroom Lathe 5HP EVS Motor 230V 1PH or 3PH
[6-273-050]

5HP frequency drive motor runs on 1 phase or 3 phase power.	Infinetely variable speeds from 20 - 2500 RPM.	Easy to ready digital display for spindle speeds.	One piece cast iron base with front access to chip tray.	Inch and Metric graduated dials.
$15,550.00

KENT 22x60 Large 4" Bore Engine Lathe 10HP 3PH
[6-273-067]

10 HP main spindle motor, 12 speeds.	D1-8 camlock, 4.12" spindle bore.	Hardened and ground gears and bedways.	Jog button, 4-way rapid traverse.	Mechanical clutch style headstock.
$16,495.00

JET 14x40 Extra Large 3-1/8" Spindle Bore Lathe 7.5HP 3PH
[6-200-025]

3-1/8" spindle bore	D1-8 camlock spindle mount.	12 spindle speeds range 42 - 1,800 rpm.	Spindle supported by 2 taper roller bearings and 1 roller bearing	Universal feed gearbox cuts inch and metric threads; no change gears required.
$16,499.00

KENT 17x40 High Precision Engine Lathe 7.5HP 3PH
[6-273-064]

7.5 HP main spindle motor, 12 speeds.	D1-6 camlock, 3.125" spindle bore.	Hardened and ground gears and bedways.	Solid one-piece cast iron base.	Inch dials and leadscrews.
$16,595.00

JET 14x60 Extra Large 3-1/8" Spindle Bore Lathe 7.5HP 3PH
[6-200-026]

3-1/8" spindle bore	D1-8 camlock spindle mount.	12 spindle speeds range 42 - 1,800 rpm.	Spindle supported by 2 taper roller bearings and 1 roller bearing	Universal feed gearbox cuts inch and metric threads; no change gears required.
$16,999.00

JET 16x40 Extra Large 3-1/8" Spindle Bore Lathe 7.5HP 3PH
[6-200-027]

3-1/8" spindle bore	D1-8 camlock spindle mount.	12 spindle speeds range 42 - 1,800 rpm.	Spindle supported by 2 taper roller bearings and 1 roller bearing	Universal feed gearbox cuts inch and metric threads; no change gears required.
$17,399.00

KENT 22x80 Large 4" Bore Engine Lathe 10HP 3PH
[6-273-068]

10 HP main spindle motor, 12 speeds.	D1-8 camlock, 4.12" spindle bore.	Hardened and ground gears and bedways.	Jog button, 4-way rapid traverse.	Mechanical clutch style headstock.
$17,495.00

JET 16x60 Extra Large 3-1/8" Spindle Bore Lathe 7.5HP 3PH
[6-200-028]

3-1/8" spindle bore	D1-8 camlock spindle mount.	12 spindle speeds range 42 - 1,800 rpm.	Spindle supported by 2 taper roller bearings and 1 roller bearing	Universal feed gearbox cuts inch and metric threads; no change gears required.
$17,899.00

JET 18x40 Extra Large 3-1/8" Spindle Bore Lathe 7.5HP 3PH
[6-200-029]

3-1/8" spindle bore	D1-8 camlock spindle mount.	12 spindle speeds range 42 - 1,800 rpm.	Spindle supported by 2 taper roller bearings and 1 roller bearing	Universal feed gearbox cuts inch and metric threads; no change gears required.
$18,299.00

JET 18x60 Extra Large 3-1/8" Spindle Bore Lathe 7.5HP
[6-200-030]

3-1/8" spindle bore	D1-8 camlock spindle mount.	12 spindle speeds range 42 - 1,800 rpm.	Spindle supported by 2 taper roller bearings and 1 roller bearing	Universal feed gearbox cuts inch and metric threads; no change gears required.
$18,799.00

JET 18x80 Extra Large 3-1/8" Spindle Bore Lathe 7.5HP 3PH
[6-200-031]

3-1/8" spindle bore	D1-8 camlock spindle mount.	12 spindle speeds range 42 - 1,800 rpm.	Spindle supported by 2 taper roller bearings and 1 roller bearing	Universal feed gearbox cuts inch and metric threads; no change gears required.
$19,299.00

KENT 26x120 Large 4" Bore Engine Lathe 10HP 3PH
[6-273-069]

10 HP main spindle motor, 12 speeds.	D1-8 camlock, 4.12" spindle bore.	Hardened and ground gears and bedways.	Jog button, 4-way rapid traverse.	Mechanical clutch style headstock.
$21,895.00

25x80 "TRENS" Lathe (Formerly TOS-Trencin) 10HP 230V 3PH
[6-297-020]

Fully inch execution - inch pitch leadscrews and inch graduated dials.	D1-8 camlock spindle mount.	Mechanical clutches for spindle start/stop.	4-Way rapid traverse.	Automatic lubrication of gearbox, headstock, feedbox and apron.
$25,695.00

KENT 22x80 Heavy Duty 4.1/16" Bore Engine Lathe 15HP Motor 230V 3PH
[6-273-054]

Solid full-length cast iron base.	15 HP Spindle Motor.	12 speeds.	Precision rigid spindle with 3 point support.	Hardened and ground gears and splines.
$31,350.00

KENT 30x80 Heavy Duty 4.1/16" Bore Engine Lathe 15HP Motor 230V 3PH
[6-273-051]

Solid full-length cast iron base.	15 HP Spindle Motor.	12 speeds.	Precision rigid spindle with 3 point support.	Hardened and ground gears and splines.
$33,395.00

KENT 30x120 Heavy Duty 4.1/16" Bore Engine Lathe 15HP Motor 230V 3PH
[6-273-052]

Solid full-length cast iron base.	15 HP Spindle Motor.	12 speeds.	Precision rigid spindle with 3 point support.	Hardened and ground gears and splines.
$38,595.00

KENT 30x160 Heavy Duty 4.1/16" Bore Engine Lathe 15HP Motor 230V 3PH
[6-273-053]

Solid full-length cast iron base.	15 HP Spindle Motor.	12 speeds.	Precision rigid spindle with 3 point support.	Hardened and ground gears and splines.
$45,950.00