Lathes : Manual with DRO - KBC Machinery
KBC 13x40 Precision Toolroom Lathe 2HP Spindle Motor 1PH with Fagor DRO System installed
[6-269-008-F]
[6-269-008-F]
| 13" swing x 40" between centers. | Complete with Fagor DRO system installed. | Floor model with full-length rear guard. | All gear head, hardened and ground ways. | 8 spindle speeds, 70-2000 RPM. |
| $5,795.00 | ||||
KBC 13x40 Precision Toolroom Lathe 2HP Spindle Motor 1PH with Newall DRO System installed
[6-269-008-N]
[6-269-008-N]
| 13" swing x 40" between centers. | Complete with Newall DRO system installed. | Floor model with full-length rear guard. | All gear head, hardened and ground ways. | 8 spindle speeds, 70-2000 RPM. |
| $6,475.00 | ||||
JET 13x40 Belt Drive Bench Lathe 2HP 1PH with Newall DRO System installed
[6-200-021-N]
[6-200-021-N]
| Complete with Newall DRO system installed. | Enclosed gearbox design provides smooth, quiet operation. | Helical cut headstock gears reduce noise. | Spindle is supported by precision tapered roller bearings. | V-way bed is induction hardened and ground. |
| $6,999.00 | ||||
KBC 14x40 Precision Toolroom Lathe 3HP Spindle Motor 3PH with Fagor DRO System installed
[6-269-006-F]
[6-269-006-F]
| 14" swing x 40" between centers. | Complete with Fagor DRO system installed. | Floor model with built-in coolant system and rear splash guard. | Hardened and ground gears in headstock, hardened and ground bed ways. | 16 spindle speeds, 45-1800 RPM. |
| $7,095.00 | ||||
KBC 14x40 Precision Toolroom Lathe 3HP Spindle Motor 3PH with Newall DRO System installed
[6-269-006-N]
[6-269-006-N]
| 14" swing x 40" between centers. | Complete with Newall DRO system installed. | Floor model with built-in coolant system and rear splash guard. | Hardened and ground gears in headstock, hardened and ground bed ways. | 16 spindle speeds, 45-1800 RPM. |
| $7,775.00 | ||||
KBC 14x40 Precision Toolroom Lathe 3HP Spindle Motor 230V 1PH with Fagor DRO System Installed
[6-269-007-F]
[6-269-007-F]
| 14" x 40" capacity. | Complete with Fagor DRO system installed. | Heavy-duty 1pc cast iron base. | Runs on 230V single-phase power (no phase converter required). | Satin-chrome dials graduated in inch and metric. |
| $7,995.00 | ||||
JET 13x40 Geared Head Bench Lathe with Stand 2HP 1PH with Newall DRO System installed
[6-200-022-N]
[6-200-022-N]
| Complete with Newall DRO system installed. | Enclosed gearbox design provides smooth, quiet operation. | Hardened and ground gears are featured in the headstock and gearbox. | D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings. | V-way bed is induction hardened and ground. |
| $8,099.00 | ||||
KBC 14x40 Precision Toolroom Lathe 3HP Spindle Motor 230V 1PH with Newall DRO System Installed
[6-269-007-N]
[6-269-007-N]
| 14" x 40" capacity. | Complete with Newall DRO system installed. | Heavy-duty 1pc cast iron base. | Runs on 230V single-phase power (no phase converter required). | Satin-chrome dials graduated in inch and metric. |
| $8,495.00 | ||||
KBC 16x40 Precision Toolroom Lathe 6HP Spindle Motor 3PH with Fagor DRO System installed
[6-269-009-F]
[6-269-009-F]
| 16" swing x 40" between centers. | Complete with Fagor DRO system installed. | D1-6 camlock spindle with 3-point bearing support. | Large 2" spindle bore. | 16 spindle speed, 45-1800 RPM. |
| $9,425.00 | ||||
KBC 16x40 Precision Toolroom Lathe 6HP Spindle Motor 3PH with Newall DRO System installed
[6-269-009-N]
[6-269-009-N]
| 16" swing x 40" between centers. | Complete with Newall DRO system installed. | D1-6 camlock spindle with 3-point bearing support. | Large 2" spindle bore. | 16 spindle speed, 45-1800 RPM. |
| $10,075.00 | ||||
Model GH-1340W-1 JET 13x40 Geared Head Engine Lathe 3HP Motor 1PH with ACU-RITE 200S DRO System installed
[6-200-040-A]
[6-200-040-A]
| Complete with ACU-RITE DRO System installed. | 13" x 40" capacity (19" in gap). | Built-in coolanty system with full-length rear splash guard. | All gear head, hardened & ground ways. | 12 spindle speeds, 40-1800 RPM. |
| $12,199.00 | ||||
Model GH-1340W-3 JET 13x40 Geared Head Engine Lathe 3HP Motor 1PH with Newall DRO System installed
[6-200-040-N]
[6-200-040-N]
| Complete with Newall DRO System installed. | 13" x 40" capacity (19" in gap). | Built-in coolanty system with full-length rear splash guard. | All gear head, hardened & ground ways. | 12 spindle speeds, 40-1800 RPM. |
| $12,199.00 | ||||
Model GH-1340W-3 JET 13x40 Geared Head Engine Lathe 3HP Motor 3PH with ACU-RITE 200S DRO System installed
[6-200-041-A]
[6-200-041-A]
| Complete with ACU-RITE 200S DRO System installed. | 13" x 40" capacity (19" in gap). | Built-in coolanty system with full-length rear splash guard. | All gear head, hardened & ground ways. | 12 spindle speeds, 40-1800 RPM. |
| $12,199.00 | ||||
Model GH-1340W-3 JET 13x40 Geared Head Engine Lathe 3HP Motor 3PH with Newall DRO System installed
[6-200-041-N]
[6-200-041-N]
| Complete with Newall DRO System installed. | 13" x 40" capacity (19" in gap). | Built-in coolanty system with full-length rear splash guard. | All gear head, hardened & ground ways. | 12 spindle speeds, 40-1800 RPM. |
| $12,199.00 | ||||
Model GH-1440W-1 JET 14x40 Geared Head Engine Lathe 3HPMotor 1PH with Newall DRO System installed
[6-200-042-N]
[6-200-042-N]
| 14" x 40" capacity. | Complete with Newall DRO System installed. | All gear head, hardened & ground ways. | 12 spindle speeds, 40-1800 RPM. | D1-4 spindle mount, 1-1/2" bore. |
| $12,999.00 | ||||
Model GH-1440W-3 JET 14x40 Geared Head Engine Lathe 3HP Motor 3PH with ACU-RITE 200S DRO System installed
[6-200-043-A]
[6-200-043-A]
| 14" x 40" capacity. | Complete with ACU-RITE 200S DRO System installed. | All gear head, hardened & ground ways. | 12 spindle speeds, 40-1800 RPM. | D1-4 spindle mount, 1-1/2" bore. |
| $12,999.00 | ||||
Model GH-1440W-3 JET 14x40 Geared Head Engine Lathe 3HP Motor 3PH with Newall DRO System installed
[6-200-043-N]
[6-200-043-N]
| 14" x 40" capacity. | Complete with Newall DRO System installed. | All gear head, hardened & ground ways. | 12 spindle speeds, 40-1800 RPM. | D1-4 spindle mount, 1-1/2" bore. |
| $12,999.00 | ||||
KENT 20x40 lathe 3" Spindle Bore 7.3HP Motor 230V 3 Phase with Newall DRO System installed
[6-273-065-N]
[6-273-065-N]
| Complete with Newall DRO System installed. | 7.3 HP main spindle motor, 12 speeds. | D1-8 camlock, 3.2" spindle bore. | Hardened and ground gears and bedways. | Inch dials and leadscrews. |
| $14,795.00 | ||||
Kent 20x60 lathe 3" Spindle Bore 7.3HP 3Phase with Newall DRO System installed
[6-273-066-N]
[6-273-066-N]
| Complete with Newall DRO System installed. | 7.3 HP main spindle motor, 12 speeds. | D1-8 camlock, 3.2" spindle bore. | Hardened and ground gears and bedways. | Inch dials and leadscrews. |
| $15,795.00 | ||||
Kent 14x40 Variable Speed Toolroom Lathe 5HP EVS Motor 230V 1PH or 3PH with Newall DRO System installed
[6-273-050-N]
[6-273-050-N]
| Complete with Newall DRO system installed. | 5HP frequency drive motor runs on 1 phase or 3 phase power. | Infinetely variable speeds from 20 - 2500 RPM. | Easy to ready digital display for spindle speeds. | One piece cast iron base with front access to chip tray. |
| $18,095.00 | ||||
JET 14x40 Extra Large 3-1/8" Spindle Bore Lathe 7.5HP 3PH with Newall DRO System installed
[6-200-025-N]
[6-200-025-N]
| Complete with Newall DRO System installed. | 3-1/8" spindle bore | D1-8 camlock spindle mount. | 12 spindle speeds range 42 - 1,800 rpm. | Spindle supported by 2 taper roller bearings and 1 roller bearing |
| $18,699.00 | ||||
KENT 22x60 Large 4" Bore Engine Lathe 10HP 3PH with Fagor DRO System installed
[6-273-067-F]
[6-273-067-F]
| Complete with Fagor DRO system installed. | 10 HP main spindle motor, 12 speeds. | D1-8 camlock, 4.12" spindle bore. | Hardened and ground gears and bedways. | Jog button, 4-way rapid traverse. |
| $18,795.00 | ||||
JET 14x40 Extra Large 3-1/8" Spindle Bore Lathe 7.5HP 3PH with ACU-RITE 300S DRO System installed
[6-200-025-A]
[6-200-025-A]
| Complete with ACU-RITE 300S DRO System installed. | 3-1/8" spindle bore | D1-8 camlock spindle mount. | 12 spindle speeds range 42 - 1,800 rpm. | Spindle supported by 2 taper roller bearings and 1 roller bearing |
| $18,899.00 | ||||
KENT 17x40 High Precision Engine Lathe 7.5HP 3PH with Newall DRO System installed
[6-273-064-N]
[6-273-064-N]
| Complete with Newall DRO System installed. | 7.5 HP main spindle motor, 12 speeds. | D1-6 camlock, 3.125" spindle bore. | Hardened and ground gears and bedways. | Solid one-piece cast iron base. |
| $19,095.00 | ||||
JET 14x60 Extra Large 3-1/8" Spindle Bore Lathe 7.5HP 3PH with Newall DRO System installed
[6-200-026-N]
[6-200-026-N]
| Complete with Newall DRO System installed. | 3-1/8" spindle bore | D1-8 camlock spindle mount. | 12 spindle speeds range 42 - 1,800 rpm. | Spindle supported by 2 taper roller bearings and 1 roller bearing |
| $19,199.00 | ||||
JET 14x60 Extra Large 3-1/8" Spindle Bore Lathe 7.5HP 3PH with ACU-RITE 300S DRO System installed
[6-200-026-A]
[6-200-026-A]
| Complete with ACU-RITE 300S DRO System installed. | 3-1/8" spindle bore | D1-8 camlock spindle mount. | 12 spindle speeds range 42 - 1,800 rpm. | Spindle supported by 2 taper roller bearings and 1 roller bearing |
| $19,399.00 | ||||
KENT 22x60 Large 4" Bore Engine Lathe 10HP 3PH with Newall DRO System installed
[6-273-067-N]
[6-273-067-N]
| Complete with Newall DRO system installed. | 10 HP main spindle motor, 12 speeds. | D1-8 camlock, 4.12" spindle bore. | Hardened and ground gears and bedways. | Jog button, 4-way rapid traverse. |
| $19,495.00 | ||||
JET 16x40 Extra Large 3-1/8" Spindle Bore Lathe 7.5HP 3PH with ACU-RITE 300S DRO System installed
[6-200-027-A]
[6-200-027-A]
| Complete with ACU-RITE 300S DRO System installed. | 3-1/8" spindle bore | D1-8 camlock spindle mount. | 12 spindle speeds range 42 - 1,800 rpm. | Spindle supported by 2 taper roller bearings and 1 roller bearing |
| $19,799.00 | ||||
KENT 22x80 Large 4" Bore Engine Lathe 10HP 3PH with Fagor DRO System installed
[6-273-068-F]
[6-273-068-F]
| Complete with Fagor DRO system installed. | 10 HP main spindle motor, 12 speeds. | D1-8 camlock, 4.12" spindle bore. | Hardened and ground gears and bedways. | Jog button, 4-way rapid traverse. |
| $20,050.00 | ||||
JET 16x40 Extra Large 3-1/8" Spindle Bore Lathe 7.5HP 3PH with Newall DRO System installed
[6-200-027-N]
[6-200-027-N]
| Complete with Newall DRO System installed. | 3-1/8" spindle bore | D1-8 camlock spindle mount. | 12 spindle speeds range 42 - 1,800 rpm. | Spindle supported by 2 taper roller bearings and 1 roller bearing |
| $20,199.00 | ||||
JET 18x40 Extra Large 3-1/8" Spindle Bore Lathe 7.5HP 3PH with Newall DRO System installed
[6-200-029-N]
[6-200-029-N]
| Complete with Newall DRO System installed. | 3-1/8" spindle bore | D1-8 camlock spindle mount. | 12 spindle speeds range 42 - 1,800 rpm. | Spindle supported by 2 taper roller bearings and 1 roller bearing |
| $20,499.00 | ||||
JET 18x40 Extra Large 3-1/8" Spindle Bore Lathe 7.5HP 3PH with ACU-RITE 300S DRO System installed
[6-200-029-A]
[6-200-029-A]
| Complete with ACU-RITE 300S DRO System installed. | 3-1/8" spindle bore | D1-8 camlock spindle mount. | 12 spindle speeds range 42 - 1,800 rpm. | Spindle supported by 2 taper roller bearings and 1 roller bearing |
| $20,799.00 | ||||
KENT 22x80 Large 4" Bore Engine Lathe 10HP 3PH with Newall DRO System installed
[6-273-068-N]
[6-273-068-N]
| Complete with Newall DRO system installed. | 10 HP main spindle motor, 12 speeds. | D1-8 camlock, 4.12" spindle bore. | Hardened and ground gears and bedways. | Jog button, 4-way rapid traverse. |
| $20,925.00 | ||||
JET 18x60 Extra Large 3-1/8" Spindle Bore Lathe 7.5HP with Newall DRO System installed
[6-200-030-N]
[6-200-030-N]
| Complete with Newall DRO System installed. | 3-1/8" spindle bore | D1-8 camlock spindle mount. | 12 spindle speeds range 42 - 1,800 rpm. | Spindle supported by 2 taper roller bearings and 1 roller bearing |
| $20,999.00 | ||||
JET 18x60 Extra Large 3-1/8" Spindle Bore Lathe 7.5HP with ACU-RITE 300S DRO System installed
[6-200-030-A]
[6-200-030-A]
| Complete with ACU-RITE 300S DRO System installed. | 3-1/8" spindle bore | D1-8 camlock spindle mount. | 12 spindle speeds range 42 - 1,800 rpm. | Spindle supported by 2 taper roller bearings and 1 roller bearing |
| $21,299.00 | ||||
JET 18x80 Extra Large 3-1/8" Spindle Bore Lathe 7.5HP 3PH with Newall DRO System installed
[6-200-031-N]
[6-200-031-N]
| Complete with Newall DRO System installed. | 3-1/8" spindle bore | D1-8 camlock spindle mount. | 12 spindle speeds range 42 - 1,800 rpm. | Spindle supported by 2 taper roller bearings and 1 roller bearing |
| $21,499.00 | ||||
JET 16x60 Extra Large 3-1/8" Spindle Bore Lathe 7.5HP 3PH with Newall DRO System installed
[6-200-028-N]
[6-200-028-N]
| Complete with Newall DRO System installed. | 3-1/8" spindle bore | D1-8 camlock spindle mount. | 12 spindle speeds range 42 - 1,800 rpm. | Spindle supported by 2 taper roller bearings and 1 roller bearing |
| $21,699.00 | ||||
JET 18x80 Extra Large 3-1/8" Spindle Bore Lathe 7.5HP 3PH with ACU-RITE 300S DRO System installed
[6-200-031-A]
[6-200-031-A]
| Complete with ACU-RITE 300S DRO System installed. | 3-1/8" spindle bore | D1-8 camlock spindle mount. | 12 spindle speeds range 42 - 1,800 rpm. | Spindle supported by 2 taper roller bearings and 1 roller bearing |
| $21,799.00 | ||||
JET 16x60 Extra Large 3-1/8" Spindle Bore Lathe 7.5HP 3PH with ACU-RITE 300S DRO System installed
[6-200-028-A]
[6-200-028-A]
| Complete with ACU-RITE 300S DRO System installed. | 3-1/8" spindle bore | D1-8 camlock spindle mount. | 12 spindle speeds range 42 - 1,800 rpm. | Spindle supported by 2 taper roller bearings and 1 roller bearing |
| $21,899.00 | ||||
KENT 26x120 Large 4" Bore Engine Lathe 10HP 3PH with Fagor DRO installed
[6-273-069-F]
[6-273-069-F]
| Complete with Fagor DRO system installed. | 10 HP main spindle motor, 12 speeds. | D1-8 camlock, 4.12" spindle bore. | Hardened and ground gears and bedways. | Jog button, 4-way rapid traverse. |
| $24,750.00 | ||||
KENT 26x120 Large 4" Bore Engine Lathe 10HP 3PH with Newall DRO installed
[6-273-069-N]
[6-273-069-N]
| Complete with Newall DRO system installed. | 10 HP main spindle motor, 12 speeds. | D1-8 camlock, 4.12" spindle bore. | Hardened and ground gears and bedways. | Jog button, 4-way rapid traverse. |
| $25,925.00 | ||||
KENT 22x80 Heavy Duty 4.1/16" Bore Engine Lathe 15HP Motor 230V 3PH with Newall DRO System installed
[6-273-054-N]
[6-273-054-N]
| Complete with Newall DRO System installed. | Solid full-length cast iron base. | 15 HP Spindle Motor. | 12 speeds. | Precision rigid spindle with 3 point support. |
| $35,050.00 | ||||
KENT 30x80 Heavy Duty 4.1/16" Bore Engine Lathe 15HP Motor 230V 3PH with Newall DRO System installed
[6-273-051-N]
[6-273-051-N]
| Complete with Newall DRO System installed. | Solid full-length cast iron base. | 15 HP Spindle Motor. | 12 speeds. | Precision rigid spindle with 3 point support. |
| $36,995.00 | ||||
KENT 30x120 Heavy Duty 4.1/16" Bore Engine Lathe 15HP Motor 230V 3PH with Newall DRO System installed
[6-273-052-N]
[6-273-052-N]
| Complete with Newall DRO system installed. | Solid full-length cast iron base. | 15 HP Spindle Motor. | 12 speeds. | Precision rigid spindle with 3 point support. |
| $43,195.00 | ||||
KENT 30x160 Heavy Duty 4.1/16" Bore Engine Lathe 15HP Motor 230V 3PH with Newall DRO System installed
[6-273-053-N]
[6-273-053-N]
| Complete with Newall DRO system installed. | Solid full-length cast iron base. | 15 HP Spindle Motor. | 12 speeds. | Precision rigid spindle with 3 point support. |
| $51,150.00 | ||||